System Sensor Horn Strobe P2475 SpectrAlert (RED) ****The product is new in box and only the box is in fair condition due to moving from storage to storage**** SpectrAlert Horns, Strobes, and Horn/Strobes3825 Ohio Avenue, St, Charles, Illinois 60174 1-800-SENSOR2, FAX; (***)-377-6495 For use with the following models: Strobes: 12 volt: 81215,8121575 24 volt: 82415,82430,8241575,82475,824110 Combo: 12 volt: P1215, P121575 24 volt: P2415, P2430, P241575, P2475, P24110 Voltage Range: DC or Full-Wave Rectified Strobes & Horn/Strobes: 12-volt models - 10.5 to 17 volts; 24-volt models - 20 to 30 volts (with MDL module): 12-volt models - 11 to 17 volts; 24-volt models - 21 to 30 volts NOTE: Horn and combo units will operate on walk tests with on-time durations of 1 sec. or greater. Flash Rate: 1 Flash Per Second Light Output: Models with 15 only in the model number are listed at 15 candela Models with 30, 75 or 110 are rated for that candela. Models with 1575 are listed at 15 candela per UL 1971 but will provide 75 candela on axis (straight ahead) Sound Output: Sound output levels are established at Underwriters Laboratories in their reverberant room. Always use the sound output specified as UL Reverberant Room when comparing products. Note for Strobes: Do not exceed; 1) 16-33 voltage range limit; 2) maximum number of 70 strobe lights when connecting the MDL Sync module with a maximum line impedance of 4 ohms per loop and; 3) maximum line impedance as required by the fire alarm control manufacturer. (this posting is the responsibility of the poster) |
s.mccullough@dfwind.com (Sherri Mccullough)
for more information. All emails will be forwarded to the poster's actual email address.