|
Comes with what you see in the pictures. If you don't see it, you probably wont get it. The unit was removed from a system that was scrapped due to contractual obligations. It powers up but we do not have the ability to test it after that. There are some decent dents in the sides and some minor scratches. There is some paint that is chipping off as well. The Unit's Serial Number Tag Reads: Power Requirements: 110 V, 50-60 Hz Boards Installed (From Right to Left, Back View): * ADE PCB Robot Current Monitor/Protection Circuit, Part Number: 024880-01, Revision: 04 * ADE Servo Controller II, Part Number: 021780-01, Revision: L or C (Was hard to tell) * IK KW-509B, Part Number: 021706-01, Revision: E * ADE Prom Safety Board, Part Number: 021339-01, Revision: N * Motherboard - DTK PIM-TBIO-Z, Revision: 9, Part Number: 024430-01, Revision: E * ADE PCB Amplifier II, Part Number: 021725-01 (the 1 is crossed out and then a 2 is written above), Revision: E * On the Motherboard there is an EEPROM that reads: Bios 350, Version: 2.0, Part Number: 02289-04, 1 of 2 For More Pictures Please Click the Following: * Picture 5 - Top Panel Removed * Picture 6 - Cards Installed, Back View * Picture 7 - Part Number Tag * Picture 8 - Serial Number Tag (this posting is the responsibility of the poster) |
T.ayers@dfwind.com (Tom Ayers) for more information. All emails will be forwarded to the poster's actual email address.
