|
LED colour changing system with 11 LED RGB bars with IR remote & DMX. ECM-T48 RGB LED Strip, external IR sensor, IR Remote control Complete colour changing system for interior or exterior use. All items are brand new. The system is special offer and only one available Our normal Price for this system is £600 + P+P + VAT. All items brand new and include 1year warranty. The system is ready to be installed and used for interior applications. The system includes an IP66 high quality enclosure that includes all the control electronics to drive the LED bars, The enclose is suitable for exterior use and installations, is UV resistant and made of very thought polycarbonate material. There are included 6 x ECM-T48 LED RGB strips that are 305mm x 20mm and have 48 surface mount LEDs. The strips are cascaded in series with interconnect cables that are included in the system. Total length of the 8 LEDs is 2.44meters. They also operating at 24VDC. There are included 5 x ECM-S48 LED RGB strips that are 305mm x 35mm and have 48 super flux LEDs at 110 Degrees light angle (see above photos, original price £140) Also included and assembled 5m of special signal and power cable, 2m of power cord (for internal use only - this need to be changed for exterior use.) and also included external IR remote sensor. Included interconnect cables with connectors 50mm long to connect the LED bars in series. The system comes with an IR remote control that you can run the system in self run mode. There are 3 preset colour changing sequences P1, P2, P3 The colour changing speed can be changed from fast to very slow in 16 steps. There are two colour changing transitions FADE and QUICK. You can pause in any colour and also you can dim the total light intensity. The system is future proof and you can always use it in conjunction with many other of our products or add up to 20 ECM-T48 LED strips available at The system also has a DMX input and can be connected and controlled by any DMX512 compatible console or controller. All items are warranted for defects and malfunctions for 1 year. All items should be used sensibly as any other normal bulbs exist in the market Vandalism or misuse are not covered If installed in exterior or dump/wet environments make sure that you use a suitable enclosure of minimum IP55 rating. The low voltage items are robust enough and safe and can be used under sheltered environments (under umbrellas balconies etc) without IP protected casing but we limit the This is very important the system is made with sensitive electronic components and needs professional or a technically competent person to install it. Although the Enclosure with the controller is IP66 and suitable for exterior use at the moment is supplied with internal use only mains cable and needs to be change an suitable exterior cable for mains. The LEDs are dump proof treated but are not suitable for a exterior use and need special assembly if fitted externally or in close proximity to water or high damp areas. The LEDs are low voltage 24VDC the enclosure includes high voltage components. The system is ready for immediate dispatch. We are happy to give you as much information as possible and help you in any way we can about these products . If an order is placed you are expected to pay with in 5 working days or at least inform us that you intent to pay very soon. VAT Is included and VAT invoice will be supplied. (this posting is the responsibility of the poster) |
Marisa.Rogers@dfwind.com (Marisa Rogers) for more information. All emails will be forwarded to the poster's actual email address.
