"Your One Stop Source for Sales & Calibration of Test & Measurement Equipiment" * Hioki 3661-20 Optical Power Meter -FMI* Simple and intuitive operation Large LCD shows measurement results and memory data at a glance Store up to 1000 data for each wavelength : 850 / 1310 / 1550 nm Support for effective data processing USB interface and supplied application software allows easy communication with a computer Measurement functions Optical power measurement (dBm) Measure absolute value of input optical power Automatically compare measured power with previously input reference value to calculate and display loss Calibration wavelength 850 nm, 1310 nm, 1550 nm Range -60 dBm to +9 dBm (auto range) Accuracy ±0.22 dB (±5 %) at-10 dBm Resolution 0.01 dBm (optical power), 0.01 dB (optical loss) Connector FC, SC (using optional connector adapter) Fiber type Single mode, multi mode (core dia. 62.5 µm max. NA: 0.275 max.) Light receiver InGaAs (dia. 1 mm) Display update rate Approx. 3 times/s (approx. 350 ms) Memory Max. 1000 data per wavelength Dedicated PC application software allows transfer of measurement data from the 3661-20 memory to a computer Functions Auto power save (after about 10minutes of inactivity; defeatable) Settings backup (settings are automatically stored at power-off) Battery check (symbol appears when voltage drops below approx. 4 V) Power supply LR6(AA) alkaline battery × 4, 0.5 VA Operating time Approx. 40 hours (continuous use) Dimensions and mass 85 mm(3.35)W × 192 mm(7.56)H (including 36 mm cover) × 35 mm(1.38)D, 300g(10.6 oz) (without batteries) Accessories CARRYING CASE 3853 (1), Strap(1) GOODS: ALL our items are FACTORY NEW (this posting is the responsibility of the poster) |
darcy-green@dfwind.com (Darcy Green)
for more information. All emails will be forwarded to the poster's actual email address.