Your Source for Quality Reconditioned Test Equipment. We are the best VALUE in test and measurement! Hewlett-Packard 3586B / 001 /004 Selective Level Meter 32.5 MHz Frequency Range, +20 to -130 dB Level Range, GPIB Option 001 WECO Connectors, Option 004 High Stability Oscillator Check out our other great test equipment Description: The HP 3586B Selective Level Meter is made for use in the design, manufacture, installation, and maintenance of Frequency Division Multiplex (FDM) systems. The 3586B meets North American Bell standards. While FDM systems are fading away, the 3586B is still an outstanding general purpose wave analyzer. The 3586B's wide frequency coverage allows measurements to be made at both voice channel and carrier frequencies. Microprocessor control adds many ease-of-use features such as amplitude offset measurements of tone or noise levels in units of dBm, dBrnC, or dBpW. Convenience features include simultaneous analog and digital level displays, precise frequency setting with HP's fractional N synthesized local oscillator, and accurate frequency counter measurements. Option 001 75 and 124 Ohm input connectors are changed to WECO types. Option 004 High Stability Oscillator 50 Hz to 32.5 MHz frequency range with 0.1 Hz resolution Measurement range of +20 to –130 dBm with .01 dB resolution 20, 400, and 2000 Hz filters or Wideband measurement < -116 dBm noise floor with 2000 Hz filter 75 Ohm or 10 Kohm unbalanced input 124, 135 or 600 Ohm balanced inputs Condition: Unit will be Reconditioned and Performance Tested to meet manufacturers specifications. Clean unit inside and out. Physically inspected, hardware re-torqued, connectors treated with a preservative, controls and switches lubricated as appropriate, power supply electrolytics tested, battery replaced. Burned in for 72 hours and then performance tested. All knobs and switches are in good condition. What do our grades mean? Click Here Need Your Unit Repaired/Reconditioned Please contact us prior to purchasing an item if you have a question. We're glad to assist in any way we can. Calibration is not guaranteed unless the item is advertised as calibrated or you purchase calibration at the time of sale. We maintain a laboratory with high quality equipment in order to verify the performance of the items we sell. We can provide ANSI Z540.1 calibration services on most items sold, if desired. Please contact us for Repair, Reconditioning, or Calibration services. * Item may have some cosmetic imperfections such as scratches, dents, cracks, sticker residue, and discoloration due to normal wear and tear. Every effort is made to make our items as cosmetically acceptable as possible. Abnormal cosmetic conditions are mentioned in the item condition. (this posting is the responsibility of the poster) |
R-donaldson@dfwind.com (Raquel Donaldson)
for more information. All emails will be forwarded to the poster's actual email address.