|
Manage Your Taped SMD, Axial, and Radial Parts Inventory 'Magic' counters offer fast setup and changeover, built-in memory for counting off a specific quantity, a rechargeable battery that will last up to one week (during normal use) without recharging, and an optional printer to produce labels for your tape reels. 1. Put the SMD adapter on the unit and tighten the nut 2. Insert SMD tape on the right side of the counter and pull it through the SMD adapter to the left reel 3. Adjust the number of holes per SMD using the digital control panel. Switch from Axial to Radial Components in No Time! To switch to axial and radial components, simply remove the SMD adapter and adjust the width of the guide bracket. * Change from SMD to radial or axial in only 10 seconds * Count 8 to 56mm devices without adjustment * Optical sensor can count up to 10,000cps * Built-in memory allows you to preset quantity to count to * Built-in tape marker allows you to mark off preset * Quanities and later cut the tape at the marks * Rechargable battery can operate for one week (average use) before recharging * Optional laser printer creates labels with company name, date, time, and quantity counted Magic Makes It Easy to Count Out a Specified Quantity When counting to a preset number of components, an alarm will sound when you reach that number. Use the tape marker to mark the tape for cutting. Magic is the Go-Anywhere Counter With its carrying handle and rechargeable battery, the 'Magic' can be conveniently used anywhere in your facility, from your storeroom to your production floor. Specifications for Magic Parts Counter: Counter range: 0201, 1005 - 56mm Optical sensor: Counts up to 10,000 components per second Alarm: audible, when preset quantity is reached Power: AC 110V(60Hz) Optional: AC 220V(50Hz) Rechargeable Battery: Charge 48 hours before first use. After first use, charge time is 12 hours. Operation time is ~ 20 hours. Dimensions: 14" x 30" x 7" (350 x 774 x 184mm) (this posting is the responsibility of the poster) |
C-Bates@dfwind.com (Cheryl Bates) for more information. All emails will be forwarded to the poster's actual email address.
