L4006A1678 High or Low limit Aquastat Controller with 100 F to 240 F operating temperature and 5 F to 30 F adj. differential Aquastat® Controllers are immersion type devices for limiting or regulating the temperature of liquids in boilers, storage tanks, and other applications where temperature control is required. • Totally enclosed Micro Switch™ snap-acting switches operate on temperature rise to setpoint. • Visible control point scale and external adjustment screw permit easy setting. • Horizontal or vertical insertion of the sensing element. • Direct or well immersion of the sensing element. • Models available for strap-on mounting. • Remote bulb model may be used to sense air temperature in ducts and in outside air sensing applications. • TRADELINE models include heat-conductive compound. High or Low limit Aquastat Controller with 100 F to 240 F operating temperature and 5 F to 30 F adj. differential SPST, contacts break on temperature rise. Operating Temperature Range (F) Operating Temperature Range (C) Electrical Ratings (millivolt) Maximum Ambient Temperature (F) Maximum Ambient Temperature (C) 5 5/8 in. high x 2 in. wide x 2 1/8 in. deep 143 mm high x 51 mm wide x 54 mm deep Horizontal or Vertical Mounting Approvals, Underwriters Laboratories Inc UL Component Recognized: File No. MP466, Vol. 6, Sec.1, Guide No. MBPR2 Approvals, Canadian Standards Association Approvals, American Gas Association IAS 3 in. (76 mm) insulation, stop factory-set at 240 F (116 C), and heat-conductive compound. (this posting is the responsibility of the poster) |
Wanda-Gomez@dfwind.com (Wanda Gomez)
for more information. All emails will be forwarded to the poster's actual email address.