|
Tektronix 1503B Metallic Cable Tester Metallic TDR Cable Tester up to 50,000 feet. * Maximum range: 50,000 feet (10 km) * Distance readout resolution: 1.2 inches (3.0 cm) * Vertical scale: 0 dB to 63.75 dB gain * Vertical accuracy: ±3% full scale * Distance/division: 1 ft/div to 5,000 ft/div * Horizontal accuracy: 2% ±0.02 feet of measured distance plus uncertainty in Vp * Amplitude: -2.5 V nominal into 50 ohm load * Pulse widths: 2 ns, 10 ns, 100 ns, 1 ms * 50, 75, 93, 125 ohm output impedances * 90-132/180-250 Vac; 45-440 Hz operation A nice very clean unit (like new) with accessory pouch, front cover, precision 50 Ohm cable (012-0482-00), 50 Ohm BNC termination (011-0123-00), BNC Connector f/f (103-0028-00), interconnect cable (012-0671-02), calculator slide rule & copy of the operating manual. 30-days warranty. A new calibration (NIST-traceable with certificate) is available for an additional $ 101.00 Checks/Money Orders must be payable to: Hart Industries of America, Inc. Almost all units will be packed using foam-in-place with antistatic foil. For heavier pieces we will use double walled boxes (350 lbs test) to insure the safe delivery of your equipment. This packing will be invoiced at cost and is ranging from $ 2.50 for a hand held multi meter to $ 25.00 for larger items. Should the packing exceed $ 25.00 it will be indicated in the listing. The removal or damage to calibration or warranty seals, will void any warranty or return privileges. - Not tested due to lack of accessories, manuals or knowledge - Man hours for testing would exceed expected sales price - Unit has known defects or parts missing as described in the listing The listing will indicate what tests have been done, any known defects or parts missing. We do not attempt to conceal defects. If a calibration is not included, it still may be available and will be invoiced at cost plus $ 20.00 (for dropping off and picking up). Our calibration prices should be competitive, since we have a blanket contract with the calibration lab. While we do our utmost to provide an unbiased accurate description about the condition of the unit, your assessment of the condition or appearance may be different. Therefore, if a unit does not meet your expectations, you will have 3 business days to request a Return Material Authorization (RMA). Do not wait weeks to determine, that the piece of equipment is not to your liking, does not go with the other decor in your place or simply you do not like, how the unit is looking at you. It is 3 working days! If you would like a rental for a week or so, let us know and we can provide you with an attractive quote. All items will be exported in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited. We are in the office from 9:00 AM to 5:00 PM Eastern Standard Time from Monday to Friday. If you send us an e-mail over the weekend, you may not an answer until the following Monday. You may pick-up your item from our warehouse located in the Burr Industrial Park (off Route 9) at: Please call first to make sure we are not on the road that day. If you are not satisfied, please tell us, so that we may correct the problem. Still have questions? Call us at (***) 728-5001 or drop us a line E-gray@dfwind.com (this posting is the responsibility of the poster) |
E-gray@dfwind.com (Earl Gray) for more information. All emails will be forwarded to the poster's actual email address.
