|
Scion tC Angel Eyes Halo Demon Headlights HID BLUE Designed specifically for your Scion tC, these angel eyes give your headlights a stunning look. Note: Does not fit the 2008+ Scion tC headlamps. Fits the 2005, 2006, and 2007 just fine though! * 2 dual output Transformers (1 for each headlamp) * 3 small circle tubes - Normally you'd just need 2 tubes, but we include an extra 3rd tube at no extra cost. * 3 large circle tubes - Normally you'd just need 2 tubes, but we include an extra 3rd tube at no extra cost. To install, you must take remove the headlamp assembly from the car. This involves removing the front bumper. Then bake the headlamp assembly in the oven to loosen the glue. You can then pull off the front clear plastic cover from the rest of the assembly. Glue the CCFL rings inside the headlamp, route the wires out the back and to the transformer. Then run the transformer's power and ground wires to your power source. You should probably put a switch on it so you can turn it on and off. Caution: Do NOT extend the white wires. Mount the transformer as far away from hot engine components as possible. Try to keep the white wires from being coiled up or kris-crossing. They carry an AC current and are sensitive. The glass tubes are fragile - be careful not to break them. good pic of phils tC w/angel eyes from Asylum'07 05' tc white angel eyes w/ orange 9.5"led flex strip Got a white set for my TC and got the smaller rings to fit fine with no problems, larger rings broke one and other two didnt work at all. So even without the larger rings they still look great. I love the product but i had a lil problem with the fit of the small semi-circle. I really liked it but i would like it to fit well ill be more amazed by it i broke 3 circles and i gave up, but thanks oznium. Try to do it more stronger and accurate. Thanks a lot first off, this is a great product adds a very aggressive touch to the tC. my parents are usually really picky about looks and what not, but they loved it! here comes the bad news...it took me a LONG time to install these. and not to mention that the tubes are FRAGILE FRAGILE FRAGILE! the fitment isnt perfect, theres some wire showing on the high beam tube (tube doesnt go all the way to the top of the housing). after installation and everything was put back on the tC, two hours later one of the high beam tubes didnt work! >:o i checked what was going on, turns out that there was a crack in the tube. soo now i have to take off my bumper, bake the headlights, and order another ring. oh and when i received my angel eyes in the mail 3 big circles and 1 small was broken good product, looks good, but a big hassle to get them to work The color is good, the ones that work look good, but I broke my other 2 big circles after doing the first headlight because both rings hung off the edge by about 2MM and wouldn't fit... guess I gotta spend $50 dollars for one silly ring... There have been no fitment issues. I was able to install them in my tC without breaking any. They are all made from the same steel mold, so they should all be the same exact size. well... i always knew that ccfls were nothing more than well... cold cathodes... just bent into the shape that it is... and most of us know that cold cathodes are really cheap... so i never found the reasoning behind the ~$150 price tag for four of them bent into shape. for something at this price, it's a deal you CANNOT miss! For questions and answers regarding this product, or to ask your own questions, visit the technical questions page. (this posting is the responsibility of the poster) |
gildagraves@dfwind.com (Gilda Graves) for more information. All emails will be forwarded to the poster's actual email address.
