|
WAVETEK METERMAN TC-253A DMM THEMOMETER ADAPTER TC253A Temperature Specifications - 50 ºC to - 20 ºC: ± (2.0 % rdg + 2 ºC) - 19 ºC to 350 ºC: ± (0.5 % rdg + 2 ºC) 351 ºC to 500 ºC: ± (2.0 % rdg + 2 ºC) 501 ºC to 1000 ºC: ± (2.9 % rdg + 2 ºC) - 58 ºF to - 4 ºF: ± (2.0 % rdg + 4 ºF) - 3 ºF to 662 ºF: ± (0.5 % rdg + 4 ºF) 663 ºF to 932 ºF: ± (2.0 % rdg + 4 ºF) 933 ºF to 1832 ºF: ± (2.9 % rdg + 4 ºF) TP-255 Bead Thermocouple (included) Temperature Range - 40 ºC to 204 ºC (- 40 ºF to 400 ºF) Tolerances 0 ºC to 204 ºC: ± (2.2 ºC or 0.75 %) 0 ºC to - 40 ºC: ± (2.2 ºC or 2.0 %) Wire Length 1 meter, with miniature plug, Teflon tape insulated Output is 1 mV DC per 1 °C or 1 °F; Indoor Use; Operating Ambient: 0 % to 80 % R.H. (0 to 35 ºC); 0 % to 70 % (35 to 50 ºC) R.H.; Storage Temperature: - 20 to 60 ºC, 0 to 80 % R.H. with battery removed; Temperature Coefficient: 0.15 x specification/°C, (< 18 °C or > 28 °C); Power: Standard 9 V battery, NEDA 1604, JIS 006P, IEC 6F22; Battery Life (typical): 300 hours alkaline; Low Battery: Battery voltage shown when switch is in OFF position, replace if < 7.1 V; Dimensions (HxWxD): 122 x 46 x 30 mm (4.8½ x 1.8½ x 1.1½); Weight (including batteries): 114 grams (4 oz); Input Connector: Accepts standard miniature thermocouple connectors (flat blades, spaced 7.9 mm, center to center) TP-255 Replacement Bead Probe; TP-254 Immersion Probe with Handle; MH101K Master Handle Probe; TP110K Immersion Probe*; TP120K Surface Probe*; TP130K Air Probe* *TP110K, TP120K, & TP130K require MH101K handle (this posting is the responsibility of the poster) |
r_montoya@dfwind.com (Rosanne Montoya) for more information. All emails will be forwarded to the poster's actual email address.
